Yayınlar & Eserler

Yayın Ağı
Makaleler 31
Tümü (31)
SCI-E, SSCI, AHCI (26)
SCI-E, SSCI, AHCI, ESCI (26)
Scopus (26)
TRDizin (3)
Diğer Yayınlar (2)

1. Enhanced Triboelectric Nanogenerator Performance Using Torrefied Biowaste Dielectrics

ÖZEN A., İPEK O., Garcia Castellanos H., YURDAKUL S., DEMİRAY M. A., GÜREL B., et al.
Advanced Engineering Materials , cilt.28, sa.4, 2026 (SCI-Expanded, Scopus)

2. Combustion and kinetic synergy of raw/torrefied chicken manure and rose pulp blended with low-grade lignite

Erkent S., Çınar M., GÜREL B., KURTULUŞ K., VAROL M., ÖZÜN S., et al.
Petroleum Science and Technology , cilt.44, sa.19, ss.3230-3245, 2026 (SCI-Expanded, Scopus)

3. Optimized torrefaction and hydrothermal carbonization of rose residue and chicken manure for enhanced biofuel production

GÜREL B., Kanyılmaz M., Çoşkun N. C., KURTULUŞ K., Saleel C. A., Keçebaş A., et al.
Journal of Thermal Analysis and Calorimetry , 2026 (SCI-Expanded, Scopus)

4. Thermal-hydraulic performance optimization of plastic plate heat exchanger with lung flow channel using additive manufacturing

Güler O. V., Georgiev A., Göltaş M., Gürbüz E. Y., Keçebaş A., Hasan M. A., et al.
Thermal Science and Engineering Progress , cilt.66, 2025 (SCI-Expanded, Scopus)

5. Combustion characteristics of low-quality lignite for different bed material sphericities in a circulating fluidized bed boiler: A numerical study

GÜREL B., Karaca Dolgun G., İPEK O., Keçebaş A.
Particuology , cilt.90, ss.364-382, 2024 (SCI-Expanded, Scopus)

6. Comprehensive study on incineration-based disposal of hazardous gas and liquid wastes from used lubricating oil refineries

Dereli B., GÜREL B., Karaca Dolgun G., Keçebaş A.
Process Safety and Environmental Protection , cilt.184, ss.79-95, 2024 (SCI-Expanded, Scopus)

7. Thermo-hydraulic efficiency of lung-inspired compact plate heat exchangers made using additive manufacturing techniques with steel, aluminum and titanium powders

Güler O. V., GÜREL B., KURTULUŞ K., Aryanfar Y., Castellanos H. G., Göltaş M., et al.
Chemical Engineering Science , cilt.283, 2024 (SCI-Expanded, Scopus)

8. Numerical analysis of the effects of interconnector design and operating parameters on solid oxide fuel cell performance

Altindal S., Erol E. G., GÜREL B.
International Journal of Hydrogen Energy , cilt.52, ss.1475-1490, 2024 (SCI-Expanded, Scopus)

9. Combustion of chicken manure and Turkish lignite mixtures in a circulating fluidized bed

GÜREL B., KURTULUŞ K., YURDAKUL S., Karaca Dolgun G., Akman R., Önür M. E., et al.
Renewable and Sustainable Energy Reviews , cilt.189, 2024 (SCI-Expanded, Scopus)

10. Numerical and experimental investigation of co-combustion of chicken manure and lignite blends in a CFBB with novel compact combustion chamber

GÜREL B., KURTULUŞ K., YURDAKUL S., VAROL M., Keçebaş A., GÜRBÜZ H.
Energy , cilt.285, 2023 (SCI-Expanded, Scopus)

11. PCDD/Fs, PAHs and HCl emissions from co-combustion of lignite and chicken manure in a circulating fluidized bed boiler with compact refractory casting

VAROL M., GÜREL B., YURDAKUL S., KURTULUŞ K., GÜRBÜZ H.
Waste Management , cilt.168, ss.423-430, 2023 (SCI-Expanded, Scopus)

12. Modeling and Assessment of the Thermo-Hydraulic Performance for a Fish Gill Patterned Plate Heat Exchanger in Biomimetic Approach

Gurel B., Kecebas A., Akkaya V. R., Goltas M., Guler O. V., Kurtulus K.
HEAT TRANSFER ENGINEERING , cilt.44, sa.11-12, ss.987-1001, 2023 (SCI-Expanded, Scopus) Sürdürülebilir Kalkınma

13. INVESTIGATION OF REDUCING PRESSURE DROP BY PATTERNING DERMAL DENTICLES (SHARK SKIN) ON THE PLATE SURFACE OF COMPACT PLATE HEAT EXCHANGER

GÜREL B., KURTULUŞ K., Keçebaş A., Güler O. V., Göltaş M., Akkaya V. R., et al.
Heat Transfer Research , cilt.54, sa.17, ss.1-15, 2023 (SCI-Expanded, Scopus)

14. Thermo-hydraulic performance improvement with nanofluids of a fish-gill-inspired plate heat exchanger

Goltas M., GÜREL B., KEÇEBAŞ A., Akkaya V. R., GÜLER O. V., KURTULUŞ K., et al.
ENERGY , cilt.253, 2022 (SCI-Expanded, Scopus)

15. Improvement of thermo-hydraulic performance with plate surface geometry for a compact plate heat exchanger manufactured by additive manufacturing

Goltas M., GÜREL B., KEÇEBAŞ A., Akkaya V. R., GÜLER O. V.
INTERNATIONAL JOURNAL OF HEAT AND MASS TRANSFER , cilt.188, 2022 (SCI-Expanded, Scopus)

16. Investigation on thermal degradation kinetics and mechanisms of chicken manure, lignite, and their blends by TGA

YURDAKUL S., GÜREL B., VAROL M., GÜRBÜZ H., KURTULUŞ K.
ENVIRONMENTAL SCIENCE AND POLLUTION RESEARCH , cilt.28, sa.45, ss.63894-63904, 2021 (SCI-Expanded, Scopus)

17. An experimental investigation of the cooling and heating performance of a gravity die casting mold with conformal cooling channels

Kurtuluş K., Bolattürk A., Coşkun A., Gürel B.
APPLIED THERMAL ENGINEERING , cilt.194, sa.117105, ss.1359-4311, 2021 (SCI-Expanded, Scopus)

18. Investigation on flow and heat transfer of compact brazed plate heat exchanger with lung pattern

GÜREL B., Akkaya V. R., Goltas M., Sen C. N., Gueler O. V., Kosar M. I., et al.
APPLIED THERMAL ENGINEERING , cilt.175, 2020 (SCI-Expanded, Scopus)

19. TÜRKİYE’DEKİ GÜNCEL BİYOKÜTLE POTANSİYELİNİN BELİRLENMESİ VE YAKILMASIYLA ENERJİ ÜRETİMİ İYİ BİR ALTERNATİF OLAN BİYOKÜTLE ATIKLAR İÇİN SEKTÖREL AÇIDAN VE TOPLAM YANMA ENERJİ DEĞERLERİNİN HESAPLANMASI

GÜREL B.
Mühendislik Bilimleri ve Tasarım Dergisi , cilt.8, sa.2, ss.407-416, 2020 (TRDizin)

20. Thermal performance evaluation for solidification process of latent heat thermal energy storage in a corrugated plate heat exchanger

GÜREL B.
APPLIED THERMAL ENGINEERING , cilt.174, 2020 (SCI-Expanded, Scopus)

21. A numerical investigation of the melting heat transfer characteristics of phase change materials in different plate heat exchanger (latent heat thermal energy storage) systems

GÜREL B.
INTERNATIONAL JOURNAL OF HEAT AND MASS TRANSFER , cilt.148, 2020 (SCI-Expanded, Scopus)

22. 330 MWth Çan Dolaşımlı Akışkan Yataklı Termik Santral Kazanının Hesaplamalı Partikül Akışkanlar Dinamiği Metoduyla Sayısal Analizi

GÜREL B., İPEK O.
Mühendislik Bilimleri ve Tasarım Dergisi , cilt.7, sa.2, ss.441-451, 2019 (TRDizin)

23. Optimization of nozzle section in plastic injection moulding process

GÜREL B., İPEK O., BAŞOĞUL Y., KEÇEBAŞ A.
Hittite Journal of Science Engineering , cilt.6, sa.2, ss.123-130, 2019 (TRDizin)

24. Design, Analysis and Prototyping of the Combined Heating and Cooling System with Solar Energy

İPEK O., ALOMARI S., GÜREL B., KAN M., ALKHALIDI M.
International Journal of Multidisciplinary Studies and Innovative Technologies , cilt.2, sa.1, ss.5-7, 2018 (Hakemli Dergi)

25. Heating System Application with Ground Source Heat Pump for Isparta Climate Conditions

İPEK O., ALKHALIDI M., KAN M., GÜREL B., ALOMARI S.
International Journal ofMultidisciplinary Studies andInnovative Technologies , cilt.2, sa.1, ss.14-16, 2018 (Hakemli Dergi)

26. Examination of Different Heat Exchangers and the Thermal Activities of Different Designs

İPEK O., KAN M., GÜREL B.
ACTA PHYSICA POLONICA A , cilt.132, sa.3, ss.580-584, 2017 (SCI-Expanded, Scopus)

27. Numerical Investigation on Hydrodynamic Combustion and NOx Emission Behavior in 8 MW Circulating Fluidized Bed

İPEK O., GÜREL B., KAN M.
ACTA PHYSICA POLONICA A , cilt.132, sa.3, ss.553-557, 2017 (SCI-Expanded, Scopus)

28. Experimental investigation of exergy loss analysis in newly designed compact heat exchangers

İPEK O., KILIÇ B., GÜREL B.
ENERGY , cilt.124, ss.330-335, 2017 (SCI-Expanded, Scopus)

29. Remote Control-Based Energy Management for Energy Savings in a Central Heating System

Sahin V., İPEK O., Basogul Y., GÜREL B., Kecebas A.
ENVIRONMENTAL PROGRESS & SUSTAINABLE ENERGY , cilt.36, sa.2, ss.600-609, 2017 (SCI-Expanded, Scopus)

30. Plate Heat Exchangers as a Compact Design and Optimization of Different Channel Angles

Kan M., Ipek O., Gurel B.
ACTA PHYSICA POLONICA A , cilt.128, 2015 (SCI-Expanded, Scopus) Sürdürülebilir Kalkınma

31. Numerical Analysis of Pulverised Coal Fired Boiler with Different Burner Geometries

Gurel B., Ipek O., Kan M.
ACTA PHYSICA POLONICA A , cilt.128, 2015 (SCI-Expanded, Scopus) Sürdürülebilir Kalkınma
Hakemli Bilimsel Toplantılarda Yayımlanmış Bildiriler 18

1. Yumurta Kabuklarının Yerli Linyitle Birlikte Kabarcıklı Akışkan Yataklı Kazanda Yakılmasında Baca Gazı Emisyonlarının Değişiminin İncelenmesi

GÜREL B.
INCOS 2020, Kayseri, Türkiye, 17 - 19 Eylül 2020, ss.299-303, (Tam Metin Bildiri)

2. Investigation Thermal Degradation Kinetics and Mechanisms of Chicken Manure, Lignite and Their Blends by TGA

YURDAKUL S., Akman R., Onur E., GÜREL B., VAROL M., GÜRBÜZ H.
ICEEE’2020, Kayseri, Türkiye, 25 - 27 Temmuz 2020, ss.92-93, (Özet Bildiri)

3. Silindirik İç İçe Boruda Nanopartikül Katkılı Faz Dönüşümlü Enerji Depolama Malzemesinin Katılaşmasının Sayısal İncelenmesi

GÜREL B.
INSAC Doğa ve Sağlık Bilimleri (ICNHS-2020), Konya, Türkiye, 22 - 23 Mayıs 2020, ss.186-198, (Tam Metin Bildiri)

4. Effect of Blending Ratio during Co-Combustion of Chicken Manure and Turkish Lignite with Thermogravimetry

Akman R., Armakan S., YURDAKUL S., GÜREL B., VAROL M., GÜRBÜZ H.
2nd International Conference on Technology and Science, Burdur, Türkiye, 14 - 16 Kasım 2019, ss.18, (Özet Bildiri)

5. Modelling of the Hydrodynamic Flow and Erosion for the 4 Different Circulating Fluidised Bed Boiler Designs by Computational Particle Fluid Dynamics

GÜREL B., İPEK O., KAN M.
INTERNATIONAL CONFERENCE ON INNOVATIVE ENGINEERINGAPPLICATIONS, Sivas, Türkiye, 20 - 22 Eylül 2018, (Tam Metin Bildiri)

6. Analytical Solving of Natural Water Circulation System and Numerical Modeling of Two Phase Flow in the Raisers

GÜREL B., İPEK O., KAN M.
INTERNATIONAL CONFERENCE ON INNOVATIVE ENGINEERINGAPPLICATIONS, Sivas, Türkiye, 20 - 22 Eylül 2018, (Tam Metin Bildiri)

7. HYDRODYNAMIC-COMBUSTION BEHAVIOR OF A 330 MWTH CIRCULATING FLUIDIZED BED RISER BURNING DIFFERENT LIGNITES

İPEK O., GÜREL B., KAN M.
First International Conference on Energy Systems Engineering (ICESE’17), 2 - 04 Kasım 2017, (Özet Bildiri)

8. INVESTIGATION OF THE EMISSIONSBEHAVIOR OF A 330 MWTHCIRCULATING FLUIDIZED BED RISERBURNING DIFFERENT LIGNITES

İPEK O., GÜREL B., KAN M.
First International Conference on Energy Systems Engineering (ICESE’17), 2 - 04 Kasım 2017, (Özet Bildiri)

9. Numerical and ExperimentalComparison of Thermal Behaviorsand Performances of TheMonoblock Heat ExchangerProduced By Laser SinteringMethod and Brazed Plate HeatExchanger

İPEK O., KAN M., GÜREL B.
First International Conference on Energy Systems Engineering (ICESE’17), 2 - 04 Kasım 2017, (Özet Bildiri)

10. Design and Application of Heating System by Using Ground -Source Heat Pump for Isparta-Turkey Climate Conditions

İPEK O., MEHDİ A., GÜREL B.
6th International Conference on Engineering, Science, Technology and Industrial Applications, 8 - 10 Eylül 2017, (Tam Metin Bildiri)

11. Numerical Approach on Hydrodynamic Combustion and NOX Emission Behavior in 8 MWth Circulating Fluidized Bed

İPEK O., GÜREL B., KAN M.
3rd International Conference On Computational And Experimental Science And Engineering, 19 - 24 Ekim 2016, (Özet Bildiri)

12. Examination of Different Heat Exchangers Thermal Activities which Have Different Designs

İPEK O., KAN M., GÜREL B.
3rd International Conference On Computational And Experimental Science And Engineering, 19 - 24 Ekim 2016, (Özet Bildiri)

13. Numerical Investigation on Hydrodynamic Behaviour in 8 MWthCirculating Fluidized Bed

İPEK O., GÜREL B., KAN M.
II. INTERNATIONAL CONFERENCE ON ENGINEERING AND NATURAL SCIENCES, 24 - 28 Mayıs 2016, (Tam Metin Bildiri)

14. Air Preheater Design And Optimization

İPEK O., GÜREL B., KAN M.
II. INTERNATIONAL CONFERENCE ON ENGINEERING AND NATURAL SCIENCES, 24 - 28 Mayıs 2016, (Tam Metin Bildiri)

15. Investigation of Heat Transfer Performance for Different Mass Flow Rate in Compact Plate Heat Exchanger

İPEK O., KAN M., GÜREL B.
II. INTERNATIONAL CONFERENCE ON ENGINEERING AND NATURAL SCIENCES, 24 - 28 Mayıs 2016, (Tam Metin Bildiri)

16. Numerical Analysis on Oxy Fuel Combustion for Different Mixture Rate

İPEK O., KAN M., GÜREL B.
International Conference On Engineering And Natural Science, 15 - 19 Mayıs 2015, ss.520-527, (Tam Metin Bildiri)

17. Benchmark On Cost And Emıssıon Reductıons Of Pıpe Insulatıon Optımızatıon Usıng Exergy Analysıs

BAŞOĞUL Y., GÜREL B., SULTAN SÜLEYMAN A., ŞİMŞEK M., KEÇEBAŞ A.
The Organizing Committee of the3rd International Exergy, Life Cycle Assessmentand Sustainability Workshop & Symposium(ELCAS-3), 7 - 09 Haziran 2013, (Tam Metin Bildiri)

18. Exergetıc Performance Predıctıon Of Geothermal Dıstrıct Heatıng System By Usıng Ann Method

KEÇEBAŞ A., GÜREL B., BAŞOĞUL Y., SULTAN SÜLEYMAN A., ŞİMŞEK M.
3 Rd International Exergy, Life Cycle Assessment And Sustainability Workshop & Symposium (Elcas-3), 7 - 09 Haziran 2013, (Tam Metin Bildiri)
Kitaplar 1

1. Isparta Yerel Ekonomik Kalkınma Vizyonu 2018 Isparta İli Metal-Makine Sektörü Analizi

KAYACAN M. C., KÖSEKAHYAOĞLU L., ÖZDEMİR G., ÜSTÜNDAĞ M., GÜREL B., KARADEDE Y., et al.
Süleyman Demirel Üniversitesi, 2018
Metrikler

Yayın

51

Yayın (WoS)

26

Yayın (Scopus)

26

Atıf (WoS)

98

H-İndeks (WoS)

6

Atıf (Scopus)

162

H-İndeks (Scopus)

9

Proje

12

Fikri Mülkiyet

1

Tez Danışmanlığı

9

Açık Erişim

9
BM Sürdürülebilir Kalkınma Amaçları
SDG 2: AMAÇ 2: AÇLIĞA SON
SDG 6: AMAÇ 6: TEMİZ SU VE SIHHİ KOŞULLAR
SDG 7: AMAÇ 7: ERİŞİLEBİLİR VE TEMİZ ENERJİ
SDG 12: AMAÇ 12: SORUMLU ÜRETİM VE TÜKETİM