Yayınlar & Eserler

Yayın Ağı
Makaleler 17
Tümü (17)
SCI-E, SSCI, AHCI (13)
SCI-E, SSCI, AHCI, ESCI (14)
ESCI (1)
Scopus (14)
Diğer Yayınlar (3)

1. Thermal performance evaluation of air and argon-filled double-glazing units: a comparative study via experimental testing and CFD modeling

KORU M., Canbolat G., DAVRAZ M., KAN M.
Engineering Research Express , cilt.8, sa.12, 2026 (ESCI, Scopus)

2. An Investigation into the Effect of Vacuum Conditions on the Filling Analysis of the Pressure Casting Process

KAN M., İPEK O., Koru M.
INTERNATIONAL JOURNAL OF METALCASTING , cilt.17, sa.1, ss.430-446, 2023 (SCI-Expanded, Scopus)

3. Determination of the casting-mold interface heat transfer coefficient for numerically die-casting process depending on different mold temperatures

KAN M.
Journal of Mechanical Science and Technology , cilt.37, sa.1, ss.427-433, 2023 (SCI-Expanded, Scopus)

4. Comparison of Different Insulation Materials with Thermal Conductivity Coefficients Based on Density and Temperature for Two Climate Zones

KAN M.
INTERNATIONAL JOURNAL OF THERMOPHYSICS , cilt.43, sa.12, 2022 (SCI-Expanded, Scopus) Creative Commons License Sürdürülebilir Kalkınma

5. The Effect of Orientation, and Temperature on Thermal Conductivity in Nettle Fiber/Polyester Composites

Koru M., Buyukkaya K., KAN M.
INTERNATIONAL JOURNAL OF THERMOPHYSICS , cilt.43, sa.10, 2022 (SCI-Expanded, Scopus) Sürdürülebilir Kalkınma

6. Determination of the Effect of the Change in the Thermal Conductivity Coefficient of EPS Depending on the Density and Temperature on the Optimum Insulation Thickness

Koru M., Korkmaz E., KAN M.
INTERNATIONAL JOURNAL OF THERMOPHYSICS , cilt.43, sa.9, 2022 (SCI-Expanded, Scopus)

7. A Numerical and Experimental Investigation of the Thermal Behavior of a Permanent Metal Mold with a Conventional Cooling Channel and a New Cooling Channel Design

KAN M., İPEK O.
INTERNATIONAL JOURNAL OF METALCASTING , cilt.16, sa.2, ss.699-712, 2022 (SCI-Expanded, Scopus)

8. Investigation of transient numerical simulation of solidification and thermal behavior of metal molds with conformal cooling channels

İPEK O., BOLATTÜRK A., KAN M., KURTULUŞ K.
SCIENTIA IRANICA , cilt.26, sa.6, ss.3325-3333, 2019 (SCI-Expanded, Scopus)

9. Design of conformal cooling channels by numerical methods in a metal mold and calculation of exergy destruction in channels

BOLATTÜRK A., İPEK O., KURTULUŞ K., KAN M.
SCIENTIA IRANICA , cilt.26, sa.6, ss.3255-3261, 2019 (SCI-Expanded, Scopus)

10. Design, Analysis and Prototyping of the Combined Heating and Cooling System with Solar Energy

İPEK O., ALOMARI S., GÜREL B., KAN M., ALKHALIDI M.
International Journal of Multidisciplinary Studies and Innovative Technologies , cilt.2, sa.1, ss.5-7, 2018 (Hakemli Dergi)

11. Numerical investigation of Cooling Performance in Classic andNew Cooling Channels of Mold Core

İPEK O., KAN M.
Open Access Journal of Physics , cilt.2, sa.3, ss.5-14, 2018 (Hakemli Dergi)

12. Heating System Application with Ground Source Heat Pump for Isparta Climate Conditions

İPEK O., ALKHALIDI M., KAN M., GÜREL B., ALOMARI S.
International Journal ofMultidisciplinary Studies andInnovative Technologies , cilt.2, sa.1, ss.14-16, 2018 (Hakemli Dergi)

13. Examination of Different Heat Exchangers and the Thermal Activities of Different Designs

İPEK O., KAN M., GÜREL B.
ACTA PHYSICA POLONICA A , cilt.132, sa.3, ss.580-584, 2017 (SCI-Expanded, Scopus)

14. Numerical Investigation on Hydrodynamic Combustion and NOx Emission Behavior in 8 MW Circulating Fluidized Bed

İPEK O., GÜREL B., KAN M.
ACTA PHYSICA POLONICA A , cilt.132, sa.3, ss.553-557, 2017 (SCI-Expanded, Scopus)

15. Numerical Analysis of Oxy-Coal Combustion System Burning Pulverized Coal Mixed with Different Flue Gas Mass Flow Rates

İPEK O., Gürel B., KAN M.
Journal of Energy Engineering , cilt.143, sa.2, 2017 (SCI-Expanded, Scopus) Sürdürülebilir Kalkınma

16. Plate Heat Exchangers as a Compact Design and Optimization of Different Channel Angles

Kan M., Ipek O., Gurel B.
ACTA PHYSICA POLONICA A , cilt.128, 2015 (SCI-Expanded, Scopus) Sürdürülebilir Kalkınma

17. Numerical Analysis of Pulverised Coal Fired Boiler with Different Burner Geometries

Gurel B., Ipek O., Kan M.
ACTA PHYSICA POLONICA A , cilt.128, 2015 (SCI-Expanded, Scopus) Sürdürülebilir Kalkınma
Hakemli Bilimsel Toplantılarda Yayımlanmış Bildiriler 17

1. Isparta’nın (Türkiye) İklim Koşullarında Toprak - Kaynaklı Isı Pompası Kullanılan Bir Isıtma Sistemine Çoklu Volumetrik Akış Oranları ile Farklı Konsantrasyonlardaki Su Etilen Glikol Çözeltisinin Etkileri

İPEK O., KILIÇ B., KAN M., ALKHALIDI M. M. H.
International Conference on Technology and Science, Antalya, Türkiye, 13 - 15 Aralık 2018, ss.189-194, (Tam Metin Bildiri)

2. Modelling of the Hydrodynamic Flow and Erosion for the 4 Different Circulating Fluidised Bed Boiler Designs by Computational Particle Fluid Dynamics

GÜREL B., İPEK O., KAN M.
INTERNATIONAL CONFERENCE ON INNOVATIVE ENGINEERINGAPPLICATIONS, Sivas, Türkiye, 20 - 22 Eylül 2018, (Tam Metin Bildiri)

3. Analytical Solving of Natural Water Circulation System and Numerical Modeling of Two Phase Flow in the Raisers

GÜREL B., İPEK O., KAN M.
INTERNATIONAL CONFERENCE ON INNOVATIVE ENGINEERINGAPPLICATIONS, Sivas, Türkiye, 20 - 22 Eylül 2018, (Tam Metin Bildiri)

4. NUMERICAL INVESTIGATION OF REACHING REGIME TEMPERATURE AND SOLIDIFICATION PROCESS IN AGRAVITY DIE CASTING MOLD WITH CONFORMAL COOLING CHANNEL

BOLATTÜRK A., İPEK O., KURTULUŞ K., KAN M.
INTERNATIONAL VOCATIONAL SCIENCE SYMPOSIUM, 26 - 29 Nisan 2018, ss.259, (Özet Bildiri)

5. Numerical and ExperimentalComparison of Thermal Behaviorsand Performances of TheMonoblock Heat ExchangerProduced By Laser SinteringMethod and Brazed Plate HeatExchanger

İPEK O., KAN M., GÜREL B.
First International Conference on Energy Systems Engineering (ICESE’17), 2 - 04 Kasım 2017, (Özet Bildiri)

6. INVESTIGATION OF THE EMISSIONSBEHAVIOR OF A 330 MWTHCIRCULATING FLUIDIZED BED RISERBURNING DIFFERENT LIGNITES

İPEK O., GÜREL B., KAN M.
First International Conference on Energy Systems Engineering (ICESE’17), 2 - 04 Kasım 2017, (Özet Bildiri)

7. HYDRODYNAMIC-COMBUSTION BEHAVIOR OF A 330 MWTH CIRCULATING FLUIDIZED BED RISER BURNING DIFFERENT LIGNITES

İPEK O., GÜREL B., KAN M.
First International Conference on Energy Systems Engineering (ICESE’17), 2 - 04 Kasım 2017, (Özet Bildiri)

8. Investigation of Numerical Simulation of Solidification and Thermal Behavior of Metal Molds with Original CoolingChannels

İPEK O., BOLATTÜRK A., KAN M., KURTULUŞ K.
4th INTERNATIONAL CONFERENCE ON COMPUTATIONALAND EXPERIMENTAL SCIENCE AND ENGINEERING(ICCESEN-2017), 4 - 08 Ekim 2017, (Özet Bildiri)

9. Electrical Energy Production from the Waste Heat Releasedthe Gas Turbine Beaings Cooled with Oil using the OrganicRankine Cycle

MOHAMMEDSALİH M. M., İPEK O., KAN M.
6th International Conference on Engineering, Science, Technology and Industrial Applications (ESTIA-2017), 8 - 10 Eylül 2017, (Tam Metin Bildiri)

10. Steady Stead Numerical Simulation of Mold Conformal Cooling Channels and Investigation of Exergy Destruction

BOLATTÜRK A., İPEK O., KURTULUŞ K., KAN M.
4th INTERNATIONAL CONFERENCE ON COMPUTATIONALAND EXPERIMENTAL SCIENCE AND ENGINEERING(ICCESEN-2017), 4 - 08 Ekim 2017, (Özet Bildiri)

11. Metal Bir Kalıpta Klasik Soğutma Kanalı ile Özgün Soğutma Kanalı Arasındaki Katılaşma Proseslerinin ve Termal Davranışlarının Nümerik Yöntemle Karşılaştırılması

BOLATTÜRK A., İPEK O., KURTULUŞ K., KAN M., KORU M.
21. Ulusal Isı Bilimi ve Tekniği Kongresi, Çorum, Türkiye, 13 - 16 Eylül 2017, ss.1252-1264, (Tam Metin Bildiri)

12. Numerical Approach on Hydrodynamic Combustion and NOX Emission Behavior in 8 MWth Circulating Fluidized Bed

İPEK O., GÜREL B., KAN M.
3rd International Conference On Computational And Experimental Science And Engineering, 19 - 24 Ekim 2016, (Özet Bildiri)

13. Examination of Different Heat Exchangers Thermal Activities which Have Different Designs

İPEK O., KAN M., GÜREL B.
3rd International Conference On Computational And Experimental Science And Engineering, 19 - 24 Ekim 2016, (Özet Bildiri)

14. Numerical Investigation on Hydrodynamic Behaviour in 8 MWthCirculating Fluidized Bed

İPEK O., GÜREL B., KAN M.
II. INTERNATIONAL CONFERENCE ON ENGINEERING AND NATURAL SCIENCES, 24 - 28 Mayıs 2016, (Tam Metin Bildiri)

15. Investigation of Heat Transfer Performance for Different Mass Flow Rate in Compact Plate Heat Exchanger

İPEK O., KAN M., GÜREL B.
II. INTERNATIONAL CONFERENCE ON ENGINEERING AND NATURAL SCIENCES, 24 - 28 Mayıs 2016, (Tam Metin Bildiri)

16. Air Preheater Design And Optimization

İPEK O., GÜREL B., KAN M.
II. INTERNATIONAL CONFERENCE ON ENGINEERING AND NATURAL SCIENCES, 24 - 28 Mayıs 2016, (Tam Metin Bildiri)

17. Numerical Analysis on Oxy Fuel Combustion for Different Mixture Rate

İPEK O., KAN M., GÜREL B.
International Conference On Engineering And Natural Science, 15 - 19 Mayıs 2015, ss.520-527, (Tam Metin Bildiri)
Metrikler

Yayın

34

Yayın (WoS)

14

Yayın (Scopus)

14

Atıf (WoS)

38

H-İndeks (WoS)

3

Atıf (Scopus)

33

H-İndeks (Scopus)

4

Proje

3

Tez Danışmanlığı

1

Açık Erişim

2
BM Sürdürülebilir Kalkınma Amaçları
SDG 6: AMAÇ 6: TEMİZ SU VE SIHHİ KOŞULLAR
SDG 12: AMAÇ 12: SORUMLU ÜRETİM VE TÜKETİM
SDG 13: AMAÇ 13: İKLİM EYLEMİ