Doç. Dr. Mehmet Fahri SARAÇ

Yayın Ağı

Makaleler 40

1. Multilayer PPy/HAp coatings on functionally graded 316L lattices for additively manufactured knee implants

KIR M., ESENDEMİR Ü., DİNÇER R., Korkmaz İ. H., SARAÇ M. F.

Ceramics International , cilt.52, sa.21, ss.37358-37372, 2026 (SCI-Expanded, Scopus)

2. Synthesis of a nano B2O3:SnO2-coated Li-rich NMC cathode material and its cycling stability enhancement

Dalgıç H. İ., Şener A., SARAÇ M. F., Uzun E., Güler A., Güler M. O., et al.

Solid State Ionics , cilt.441, 2026 (SCI-Expanded, Scopus)

3. Load-Bearing Characteristics of SLA-Fabricated Octahedral Porous Structures

KIR M., ESENDEMİR Ü., SARAÇ M. F.

Strain , cilt.62, sa.2, 2026 (SCI-Expanded, Scopus)

4. Tailoring the optoelectronic properties of ZnO nanowires via TiO2 coating

Saraç M. F., Mert M., Solakyıldırım T., Teber A.

INDIAN JOURNAL OF PHYSICS , cilt.99, ss.1-11, 2025 (SCI-Expanded, Scopus)

5. Investigation of Microstructural and Mechanical Properties of St-37 and Strenx-960 Steels by A-TIG Welding Method

Kasım E., Saraç M. F., Genç İ.

Eskişehir Osmangazi Üniversitesi Mühendislik Mimarlık Fakültesi Dergisi , cilt.33, sa.1, ss.1732-1738, 2025 (TRDizin)

6. UÇUCU KÜL VE GUAR SAKIZI İLE STABİLİZE EDİLMİŞ BİR KİL ZEMİNİN MUKAVEMET ÖZELLİKLERİNİN TAGUCHİ TEKNİĞİ KULLANILARAK DEĞERLENDİRİLMESİ

Yazıcı M. F., Sarac M. F., Aydın Ç., Polat M. B., ÇALIK C. M., ÖZEN C.

KSÜ Mühendislik Bilimleri Dergisi , cilt.28, sa.1, ss.89-103, 2025 (TRDizin)

7. Effect of SnO2 Coating on the Structural, Optical, and Electrical Properties of TiO2 Nanowires Fabricated by a Two-Step Deposition Method

Ay H. T., Sarac M. F., Solakyildirim T.

BRAZILIAN JOURNAL OF PHYSICS , cilt.55, sa.4, ss.1-9, 2025 (SCI-Expanded, Scopus)

8. Niobium modification on dielectric, magnetic and structural features of nanocrystalline Ni–Co ferrites

Teber A., SARAÇ M. F.

Bulletin of Materials Science , cilt.47, sa.1, 2024 (SCI-Expanded, Scopus)

9. Preparation and characterization of fumed silica added PMMA denture base materials

KÜÇÜKEŞMEN H. C., SARAÇ M. F.

International Journal of Polymer Analysis and Characterization , cilt.29, sa.8, ss.675-684, 2024 (SCI-Expanded, Scopus)

10. Investigation of Microstructure and Wear Behaviors of AZ91 Alloy Under Different Heat Treatments

AKGÜN G., Buran D., Sarac M. F.

Erzincan Üniversitesi Fen Bilimleri Enstitüsü Dergisi , cilt.16, sa.2, ss.516-527, 2023 (TRDizin)

11. Electrical, Magnetic, Microstructural, and Characteristic Properties of Zirconium-Substituted Co0.5 Ni0.5 Zrx Fe2− x O4 Spinel Ferrite Nanostructures

Teber A., SARAÇ M. F.

Arabian Journal for Science and Engineering , cilt.48, sa.6, ss.8153-8164, 2023 (SCI-Expanded, Scopus) Sürdürülebilir Kalkınma

12. Yttrium-substituted Co0.5Ni0.5YxFe2-xO4 ferrites as microwave absorbers by investigating structural, magnetic, dielectric, and absorption characteristics

Teber A., SARAÇ M. F.

Journal of Magnetism and Magnetic Materials , cilt.572, 2023 (SCI-Expanded, Scopus)

13. Cr-substituted nanocrystalline Ni–Co ferrites: tuning dielectric, magnetic, structural, X-band microwave absorption, and characteristic properties

Teber A., SARAÇ M. F.

Journal of Materials Science: Materials in Electronics , cilt.34, sa.4, 2023 (SCI-Expanded, Scopus)

14. Continuous Flow-Assisted Polyol Synthesis of Citric Acid Functionalized Iron Oxide Nanoparticles

Akkurt N., Altan C. L., SARAÇ M. F.

JOURNAL OF SUPERCONDUCTIVITY AND NOVEL MAGNETISM , cilt.35, sa.2, ss.615-623, 2022 (SCI-Expanded, Scopus)

15. Characterization of Various Carbon-Based Polypropylene Nanocomposites

Kaya O., BURAN D., Akkurt N., YAPICI K., SARAÇ M. F.

JOURNAL OF MATERIALS ENGINEERING AND PERFORMANCE , cilt.30, sa.1, ss.190-201, 2021 (SCI-Expanded, Scopus)

16. Effect of Nanoclay Addition on Impact Behavior on Hybrid Composite Structures

ESENDEMİR Ü., ŞİMŞEK R., SARAÇ M. F.

Journal of the Institute of Science and Technology , cilt.10, sa.4, ss.2831-2839, 2020 (TRDizin)

17. In-situ synthesis of 3D printable mono- and Bi-metallic (Cu/Ag) nanoparticles embedded polymeric structures with enhanced electromechanical properties

AKTİTİZ İ., VAROL R., Akkurt N., SARAÇ M. F.

POLYMER TESTING , cilt.90, 2020 (SCI-Expanded, Scopus)

18. Sulfidation and selenidation of nickel nanoparticles

LYNCH B. B., KELLIHER A. P., ANDERSON B. D., JAPIT A., SPENCER M., RIZVI M. H., et al.

Carbon Energy , ss.1-8, 2020 (Hakemli Dergi)

19. Magnetic, Structural, and Optical Properties of Gadolinium-Substituted Co0.5Ni0.5Fe2O4 Spinel Ferrite Nanostructures

SARAÇ M. F.

JOURNAL OF SUPERCONDUCTIVITY AND NOVEL MAGNETISM , cilt.33, sa.2, ss.397-406, 2020 (SCI-Expanded, Scopus)

20. A facile two-step fabrication of titanium dioxide coated copper oxide nanowires with enhanced photocatalytic performance

SARAÇ M. F., Ozturk K., Yatmaz H. C.

MATERIALS CHARACTERIZATION , cilt.159, 2020 (SCI-Expanded, Scopus)

21. Titanyum Karbür (TiC) Takviyeli Epoksi ile Güçlendirilmiş Hibrit Kompozitlerin Çarpma Davranışının Deneysel ve Sayısal İncelenmesi

USAL M. R., TAŞLIDERE M., SARAÇ M. F.

Düzce Üniversitesi Bilim ve Teknoloji Dergisi , cilt.8, sa.1, ss.18-32, 2020 (TRDizin)

22. Stereolitrografi ile 3B Basılabilir Nanokil Takviyeli Polimer Yapıların Mekanik Karakterizasyonu

SARAÇ M. F., MERT M., BÜLBÜL İ., AKTİTİZ İ., SAYGI B., VAROL R.

Iğdır Üniversitesi Fen Bilimleri Enstitüsü Dergisi , cilt.9, sa.3, ss.1584-1593, 2019 (TRDizin)

23. Comparison of wear properties of HVOF sprayed WC-Co and WC-CoCr coatings on Al alloys

Ozkavak H. V., ŞAHİN Ş., SARAÇ M. F., Alkan Z.

MATERIALS RESEARCH EXPRESS , cilt.6, sa.9, 2019 (SCI-Expanded, Scopus)

24. Comparison of wear properties of HVOF sprayed WC-Co and WC-CoCr coatings on Al alloys

VAROL ÖZKAVAK H., Şahin Ş., SARAÇ M. F., ALKAN Z.

MATERIALS RESEARCH EXPRESS , cilt.6, ss.96554, 2019 (SCI-Expanded, Scopus)

25. Effect of heat treatment on wear and corrosion behavior of high chromium white cast iron

SARAÇ M. F., DİKİCİ B.

MATERIALS TESTING , cilt.61, sa.7, ss.659-666, 2019 (SCI-Expanded, Scopus)

26. 3B Basılabilir Füme Silika Takviyeli Foto-Duyarlı Polimerlerin Mekanik Özelliklerinin İncelenmesi

SARAÇ M. F., ORANLI A., AKTİTİZ İ., SAYGI B., VAROL R.

Düzce Üniversitesi Bilim ve Teknoloji Dergisi , cilt.7, sa.3, ss.1793-1805, 2019 (TRDizin)

27. Calcination effect on the magneto-optical properties of vanadium substituted NiFe2O4 nanoferrites

Slimani Y., Almessiere M. A., GUNER S., Tashkandi N. A., Baykal A., SARAÇ M. F., et al.

JOURNAL OF MATERIALS SCIENCE-MATERIALS IN ELECTRONICS , cilt.30, sa.10, ss.9143-9154, 2019 (SCI-Expanded, Scopus)

28. The effect of Nb substitution on magnetic properties of BaFe12O19 nanohexaferrites

Almessiere M. A., Slimani Y., Tashkandi N. A., Baykal A., SARAÇ M. F., Trukhanov A. V., et al.

CERAMICS INTERNATIONAL , cilt.45, sa.2, ss.1691-1697, 2019 (SCI-Expanded, Scopus)

29. Parçacık Boyutuna Bağlı Füme Silika Bazlı Kesme ile Kalınlaşan Akışkanların Reolojik Davranışı

SARAÇ M. F., Peker S., YAPICI K.

Mühendislik Bilimleri ve Tasarım Dergisi , cilt.6, sa.4, ss.665-671, 2018 (TRDizin)

30. PARÇACIK BOYUTUNA BAĞLI FÜME SİLİKA BAZLI KESME İLE KALINLAŞAN AKIŞKANLARIN REOLOJİK DAVRANIŞI

SARAÇ M. F., Peker S., YAPICI K.

Mühendislik Bilimleri ve Tasarım Dergisi , cilt.6, sa.4, ss.665-671, 2018 (SCI-Expanded, Scopus, TRDizin)

31. Size Effects of Recovered Ti-6Al-4V Alloy Scrap by Conventional P/M Techniques

Üstündağ M., Saraç M. F., VAROL R.

Journal of Materials Science and Engineering B , cilt.8, ss.120-125, 2018 (Hakemli Dergi)

32. Investigation of Thermal and Mechanical Properties of Aramid Fiber Reinforced Thermoplastic Polyurethane Elastomer Composites

SARAÇ M. F., BURAN D., KORU M.

Süleyman Demirel Üniversitesi Fen Bilimleri Enstitüsü Dergisi , cilt.22, sa.2, ss.477-481, 2018 (SCI-Expanded, Scopus, TRDizin)

33. Investigation of Thermal and Mechanical Properties of Aramid Fiber Reinforced Thermoplastic Polyurethane Elastomer Composites

SARAÇ M. F., BURAN D., KORU M.

Süleyman Demirel Üniversitesi Fen Bilimleri Enstitüsü Dergisi , cilt.22, sa.2, ss.477-481, 2018 (SCI-Expanded, Scopus, TRDizin)

34. Size Effects of Recovered Ti-6Al-4V Alloy Scrap by Conventional P/M Techniques

ÜSTÜNDAĞ M., SARAÇ M. F., VAROL R.

Journal of Materials Science an Engineering B , cilt.8, sa.5, ss.120-125, 2018 (Hakemli Dergi)

35. The Relationship Between Cement Quality and Separation Cut Size

UMUCU Y., DENİZ V., SARAÇ M. F., KUZGUN A. E.

INZYNIERIA MINERALNA-JOURNAL OF THE POLISH MINERAL ENGINEERING SOCIETY , cilt.16, ss.189-194, 2015 (ESCI, Scopus)

36. Control of Branching in Ni3C1-x Nanoparticles and Their Conversion into Ni12P5 Nanoparticles

Sarac M. F., Wu W., Tracy J. B.

CHEMISTRY OF MATERIALS , cilt.26, sa.10, ss.3057-3064, 2014 (SCI-Expanded, Scopus)

37. Airbrushed Nickel Nanoparticles for Large-Area Growth of Vertically Aligned Carbon Nanofibers on Metal (Al, Cu, Ti) Surfaces

Sarac M. F., Anderson B. D., Pearce R. C., Railsback J. G., Oni A. A., White R. M., et al.

ACS APPLIED MATERIALS & INTERFACES , cilt.5, sa.18, ss.8955-8960, 2013 (SCI-Expanded, Scopus)

38. Transfer of Vertically Aligned Carbon Nanofibers to Polydimethylsiloxane (PDMS) While Maintaining their Alignment and Impalefection Functionality

Pearce R. C., Railsback J. G., Anderson B. D., Sarac M. F., MCKNIGHT T. E., Tracy J. B., et al.

ACS APPLIED MATERIALS & INTERFACES , cilt.5, sa.3, ss.878-882, 2013 (SCI-Expanded, Scopus)

39. Effects of Ligand Monolayers on Catalytic Nickel Nanoparticles for Synthesizing Vertically Aligned Carbon Nanofibers

Sarac M. F., Wilson R. M., Johnston-Peck A. C., Wang J., Pearce R., KLEIN K. L., et al.

ACS APPLIED MATERIALS & INTERFACES , cilt.3, sa.4, ss.936-940, 2011 (SCI-Expanded, Scopus) Sürdürülebilir Kalkınma

40. Surface Dezincification and Selective Oxidation Induced Heterogeneous Semiconductor Nanowire/Nanofilm Network Junctions

Sarac M. F., Shimpi P., MACKEY J. A., KIM D., Gao P.

CRYSTAL GROWTH & DESIGN , cilt.10, sa.9, ss.3942-3948, 2010 (SCI-Expanded, Scopus)

Hakemli Bilimsel Toplantılarda Yayımlanmış Bildiriler 19

1. Stereolitrografi ile 3B Basılabilir Nanokil Takviyeli Polimer Yapıların Mekanik Karakterizasyonu

SARAÇ M. F., MERT M., BÜLBÜL İ., AKTİTİZ İ., SAYGI B., VAROL R.

4th International Congress on 3D Printing (Additive Manufacturing) Technologies and Digital Industry 2019, Antalya, Türkiye, 11 - 14 Nisan 2019, ss.106-117, (Tam Metin Bildiri)

2. 3B Basılabilir Füme Silika Takviyeli Fotoduyarlu Polimerlerin Mekanik Özelliklerinin İncelenmesi

SARAÇ M. F., ORANLI A., AKTİTİZ İ., SAYGI B., VAROL R.

4th International Congress on 3D Printing (Additive Manufacturing) Technologies and Digital Industry 2019, Antalya, Türkiye, 11 - 14 Nisan 2019, ss.133-143, (Tam Metin Bildiri)