A New Approach to Compressive Strength Assessment of Concrete: Image Processing Technique


BAŞYİĞİT C. , ÇOMAK B., KILINÇARSLAN Ş.

2nd International Congress on Advances in Applied Physics and Materials Science (APMAS), Antalya, Türkiye, 26 - 29 Nisan 2012, cilt.1476, ss.65-69 identifier identifier

  • Cilt numarası: 1476
  • Doi Numarası: 10.1063/1.4751567
  • Basıldığı Şehir: Antalya
  • Basıldığı Ülke: Türkiye
  • Sayfa Sayıları: ss.65-69

Özet

In this study, the compressive strength levels of different concrete classes were estimated using an image processing technique. A series of different concretes were prepared by applying different water/cement ratios. The percentages of cement matrix, aggregate, and air void were calculated by processing the images obtained from the surfaces of hardened concretes. The relation between the parameters that were calculated via image processing and the compressive strengths of the concretes produced were examined. By this means, the compressive strength levels of concretes were estimated one by one via the developed image processing software and ImageJ. It was found that the compressive strength levels of concretes can be estimated with a high level of correlation by using the values obtained via the image processing technique. The developed software can be used to estimate the compressive strength levels of concretes. In addition, in considering concrete age, cure conditions, and relative humidity, the method used in this study can be used together with destructive and non-destructive test methods.