Experimental Analysis of Effect to Friction of Commercial Oil Additive Used in Automobiles
JOURNAL OF POLYTECHNIC-POLITEKNIK DERGISI, vol.27, no.3, pp.921-929, 2024 (ESCI, TRDizin)
- Publication Type: Article / Article
- Volume: 27 Issue: 3
- Publication Date: 2024
- Journal Name: JOURNAL OF POLYTECHNIC-POLITEKNIK DERGISI
- Journal Indexes: Emerging Sources Citation Index (ESCI), TR DİZİN (ULAKBİM)
- Page Numbers: pp.921-929
- Open Archive Collection: AVESIS Open Access Collection
- Süleyman Demirel University Affiliated: Yes
Abstract
With the development of automotive technology, long life, high power, and low fuel consumption performance are expected from
the internal combustion engine. This study investigated the effects of commercial oil additives on friction under different
experimental conditions. In order to examine the friction effect, the samples prepared from the piston ring and cylinder were tested
with the Reciprocating Test Rig at different speeds and loads. Using additives in the commercial oil lubricant showed a little
reduction under the lower load. When the applied load increased commercial oil showed better friction coefficient performance in
the experimental study. As for the expected results, the friction coefficient reduced with increasing sliding speeds under all
conditions. In general, it was found that the commercial oil supplement did not have much effect on reducing the coefficient of
friction when all the results were evaluated under these experimental conditions