Comparison of electrorheological properties of some polyaniline derivatives


Gercek B., Yavuz M. , Yilmaz H., Sari B., Unal H. I.

COLLOIDS AND SURFACES A-PHYSICOCHEMICAL AND ENGINEERING ASPECTS, cilt.299, ss.124-132, 2007 (SCI İndekslerine Giren Dergi) identifier identifier

  • Cilt numarası: 299
  • Basım Tarihi: 2007
  • Doi Numarası: 10.1016/j.colsurfa.2006.11.028
  • Dergi Adı: COLLOIDS AND SURFACES A-PHYSICOCHEMICAL AND ENGINEERING ASPECTS
  • Sayfa Sayıları: ss.124-132

Özet

In this study, electrorheological (ER) properties of various polyaniline derivatives, namely: poly(o-toluidine) (POT), poly(N-methyl aniline) (PNMAn), poly(N-ethyl aniline) (PNEAn), and poly(2-ethyl aniline) (P2EAn) were investigated. Effects of various parameters such as; particle size, particle conductivity, suspension's sedimentation stability, flow times, concentration, electric field strength, shear rate, frequency and temperature onto ER activity of these polyaniline derivatives/silicone oil (SO) suspensions were investigated. Average particle diameters (d(50)) of four samples were determined by dynamic light scattering as 8.51, 9.08, 11.22 and 13.46 mu m for P2EAn, PNEAn, PNMAn and POT, respectively. It was found that POT has the highest conductivity with a value of 6.87 x 10(-7) S m(-1), and P2EAn has the lowest with 1.01 x 10(-7) S m(-1), among the polyaniline derivatives examined. Fifty four percent of sedimentation ratio was measured after 30 days for all the polyaniline derivatives/SO suspensions studied. The highest electric field viscosity was observed for POT/SO suspensions as eta = 1.04 kPa s. The maximum excess shear stress was obtained for the POT suspensions (25 wt.%) as Delta tau = 917 Pa at E = 2 kV/mm. (c) 2006 Elsevier B.V. All rights reserved.