Clean fuel-magnesia bonded coal briquetting

Tosun Y. I.

FUEL PROCESSING TECHNOLOGY, vol.88, no.10, pp.977-981, 2007 (Peer-Reviewed Journal) identifier identifier

  • Publication Type: Article / Article
  • Volume: 88 Issue: 10
  • Publication Date: 2007
  • Doi Number: 10.1016/j.fuproc.2007.05.008
  • Journal Indexes: Science Citation Index Expanded, Scopus
  • Page Numbers: pp.977-981


Benefaction from coal fines as solid fuel in Turkey is very much important for economical development. Beneficiation from washed coal fines in the industry using solid fuel at lump size and in the municipal areas as an household solid fuel may be only provided by hot briquetting of the coal fines. The most practical common way of that berrefication from coal fines in our country have been hot binding by sulfite liquor-sulfite liquor-melas and lime mixtures. Harmful the flue content of sulfite liquor-melas may only be eliminated by lime, a type of solid additive. However, cold bonded briquettes produced from coal fines are environmentally free. Just ash contents of these briquettes increase at a certain degree and heat content of them decrease at a certain extent. By using magnesia binder showed in this study, Tuncbilek lignite fines have been briquetted by cold and hot briquetting techniques. The qualities of briquettes produced by cold binders were compared with to those produced by other hot binding methods As a result, magnesia binder showed the similar characteristics with those of the briquettes produced by only cold bonded gypsum. Use of magnesite mixture and gypsum just as only cold binder was not suitable for the requirements from the coal briquettes to be used as solid fuels, particularly from household fuels, but just only as cold additive should be used. (c) 2007 Elsevier B.V. All rights reserved.