Porcelain surface-conditioning techniques and the shear bond strength of ceramic brackets


Creative Commons License

Tuerkkahraman H., Kuecuekesmen H. C.

EUROPEAN JOURNAL OF ORTHODONTICS, cilt.28, ss.440-443, 2006 (SCI İndekslerine Giren Dergi) identifier identifier identifier

  • Cilt numarası: 28 Konu: 5
  • Basım Tarihi: 2006
  • Doi Numarası: 10.1093/ejo/cjl026
  • Dergi Adı: EUROPEAN JOURNAL OF ORTHODONTICS
  • Sayfa Sayıları: ss.440-443

Özet

The aim of this study was to compare the effects of various porcelain surface-conditioning techniques, used either alone or in combination, on the shear bond strength (SBS) of ceramic brackets cured with a light emitting diode (LED). Thirty glazed porcelain facets were randomly divided into three groups of 10. In group I, the porcelain surfaces were etched with 9.6 per cent hydrofluoric acid (HFA) for 2 minutes before silane application, in group II, the porcelain surfaces were sandblasted with aluminium oxide particles, etched with 9.6 per cent HFA for 2 minutes, and silane applied, and in group III, the porcelain surfaces were sandblasted with aluminium oxide particles before silane application. Spirit ceramic brackets were bonded with a light-cured composite resin (Light Bond) and a LED. All specimens were stored in distilled water at 37 degrees C for 24 hours and thermocycled. Bond strength was determined in shear mode at a crosshead speed of 0.5 mm/minute until fracture occurred.