Prof. Osman İPEK

ACTA PHYSICA POLONICA A, vol.132, no.3, pp.553-557, 2017 (Journal Indexed in SCI)

Examination of Different Heat Exchangers and the Thermal Activities of Different Designs

ACTA PHYSICA POLONICA A, vol.132, no.3, pp.580-584, 2017 (Journal Indexed in SCI)

Experimental investigation of exergy loss analysis in newly designed compact heat exchangers

İPEK O. , KILIÇ B., GÜREL B.

ENERGY, vol.124, pp.330-335, 2017 (Journal Indexed in SCI)

Numerical Analysis of Oxy-Coal Combustion System Burning Pulverized Coal Mixed with Different Flue Gas Mass Flow Rates

İPEK O. , Gürel B., KAN M.

Journal of Energy Engineering, vol.143, no.2, 2017 (Journal Indexed in SCI)

EFFECT OF INJECTION PARAMETERS AND VACUUM ON THE STRENGTH AND POROSITY AMOUNT OF DIE-CASTED A380 ALLOY

Yalcin B. , Koru M. , Ozgu A. E. , İPEK O.

INTERNATIONAL JOURNAL OF METALCASTING, vol.11, no.2, pp.195-206, 2017 (Journal Indexed in SCI)

Remote Control-Based Energy Management for Energy Savings in a Central Heating System

Sahin V. , İPEK O. , Basogul Y., GÜREL B. , Kecebas A.

ENVIRONMENTAL PROGRESS & SUSTAINABLE ENERGY, vol.36, no.2, pp.600-609, 2017 (Journal Indexed in SCI)

Experimental investigation of heat transfer and effectiveness in corrugated plate heat exchangers having different chevron angles

HEAT AND MASS TRANSFER, vol.53, no.2, pp.725-731, 2017 (Journal Indexed in SCI)

Numerical Analysis of Pulverised Coal Fired Boiler with Different Burner Geometries

Gurel B. , Ipek O. , Kan M.

ACTA PHYSICA POLONICA A, vol.128, 2015 (Journal Indexed in SCI)

Plate Heat Exchangers as a Compact Design and Optimization of Different Channel Angles

Kan M. , Ipek O. , Gurel B.

ACTA PHYSICA POLONICA A, vol.128, 2015 (Journal Indexed in SCI)

Analysis of temperature distribution, burn-up and breeding parameters in nuclear fuel rod in fusion-fission reactor system fueled with mixed ThO2-UO2 fuel

Ipek O.

INTERNATIONAL JOURNAL OF ENERGY RESEARCH, vol.35, no.2, pp.112-122, 2011 (Journal Indexed in SCI)

DETERMINATION OF THE THERMAL CONTACT RESISTANCE IN THE CASTING-MOULD INTERFACE DURING HIGH PRESSURE DIE-CASTING PROCESS DEPENDING ON MOULD TEMPERATURE

İPEK O. , Koru M.

ISI BILIMI VE TEKNIGI DERGISI-JOURNAL OF THERMAL SCIENCE AND TECHNOLOGY, vol.31, no.1, pp.45-57, 2011 (Journal Indexed in SCI)

Articles Published in Other Journals

Plakalı Isı Değiştiricilerinde Isı Geçişi Ve Etkinliğin Deneysel Olarak İncelenmesi Ve Yapay Sinir Ağlarının (YSA) Uygulanması

Düzce Üniversitesi Bilim ve Teknoloji Dergisi, vol.7, no.1, pp.399-412, 2019 (Refereed Journals of Other Institutions)

330 MWth Çan Dolaşımlı Akışkan Yataklı Termik Santral Kazanının Hesaplamalı Partikül Akışkanlar Dinamiği Metoduyla Sayısal Analizi

GÜREL B. , İPEK O.

Mühendislik Bilimleri ve Tasarım Dergisi, vol.7, no.2, pp.441-451, 2019 (Other Refereed National Journals)

Optimization of nozzle section in plastic injection moulding process

GÜREL B. , İPEK O. , BAŞOĞUL Y., KEÇEBAŞ A.

Hittite Journal of Science Engineering, vol.6, no.2, pp.123-130, 2019 (Other Refereed National Journals)

Thermodynamic Analysis of The Organic Rankine Cycle For Diesel Engine Waste Heat Recovery

European Journal of Science and Technology, no.15, pp.112-117, 2019 (Refereed Journals of Other Institutions)

Determining Sound Absorbing and Transmission Loss Properties of Rubbers Used in Automotive Industries

İPEK O. , KORU M. , SERÇE O., KARABULUT h., HIDIROĞLU m.

The Eurasia Proceedings of Science, Technology, Engineering Mathematics, vol.4, pp.137-148, 2018 (Other Refereed National Journals)

Determining Thermal Properties of A383.1 Aluminum Alloy Depends on Temperature

İPEK O. , SERÇE O., KORU M.

The Eurasia Proceedings of Science, Technology, Engineering Mathematics, vol.4, pp.196-202, 2018 (Other Refereed National Journals)

Heating System Application with Ground Source Heat Pump for Isparta Climate Conditions

İPEK O. , ALKHALIDI M., KAN M. , GÜREL B. , ALOMARI S.

International Journal ofMultidisciplinary Studies andInnovative Technologies, vol.2, no.1, pp.14-16, 2018 (Refereed Journals of Other Institutions)

Numerical investigation of Cooling Performance in Classic andNew Cooling Channels of Mold Core

İPEK O. , KAN M.

Open Access Journal of Physics, vol.2, no.3, pp.5-14, 2018 (Refereed Journals of Other Institutions)

Design, Analysis and Prototyping of the Combined Heating and Cooling System with Solar Energy

İPEK O. , ALOMARI S., GÜREL B. , KAN M. , ALKHALIDI M.

International Journal of Multidisciplinary Studies and Innovative Technologies, vol.2, no.1, pp.5-7, 2018 (Refereed Journals of Other Institutions)

Isıtma Sistemlerinde Kullanılan Plakalı Isı Deği tiricilerin Termodinamik Analizi

Mehmet Akif Ersoy Üniversitesi Fen Bilimleri Enstitüsü Dergisi, vol.4, no.1, pp.13-19, 2013 (Other Refereed National Journals)

The Neutronic Analysis Of The Flux Dispersion In A Multi Layered D T Driven Hybrid Blanket

TURKISH JOURNAL OF ENGINEERING AND ENVIRONMENTAL SCIENCES, vol.24, no.6, pp.373-382, 2000 (Other Refereed National Journals)

Enerji Üretimi Ve Kullanımda Çevre Risk Faktörünün Etkinliği

Ege Üniversitesi, GÜNEŞ ENERJİSİ DERGİSİ, vol.3, no.1, 1999 (Other Refereed National Journals)

Plutonyum Esaslı Bir Nükleer Yakıt Ortamının Kritik Kütle Ve Reflektör Etkinliği Açısından Nötron Fizik Analizi

ERİŞEN A., İPEK O. , KOÇAK S.

Isparta Mühendislik Fakültesi, MAKİNE MÜHENDİSLİĞİ DERGİSİ, no.7, 1993 (Other Refereed National Journals)

Refereed Congress / Symposium Publications in Proceedings

Importance and Use of Hybrid-Electric Vehicles In Turkey

KILIÇ B., ARABACI E., İPEK O.

2nd International Conference on Technology and Science, Burdur, Turkey, 14 - 16 November 2019, pp.28-32

Effects of Refrigerants on The Coefficient of Performance (COP) of Vapor Compression Refrigeration

2nd International Conference on Technology and Science, Burdur, Turkey, 14 - 16 November 2019, pp.24-27

EXERGY AND COST ANALYSIS OF AN ORC SYSTEM WITH DIFFERENTORGANIC FLUIDS USING A LOW -TEMPERATURE WASTE HEATSOURCE

İPEK O. , GÖLTAŞ M.

Uluslararası 29 Ekim Bilimsel Araştırmalar Sempozyumu, 26 - 29 October 2019

ENERGY AND EFFICIENCY ANALYSIS OF AN ORC SYSTEM WITHDIFFERENT WORKING FLUIDS USING WASTE HEAT SOURCE DRAWNBY COOLING OIL FROM TURBINE BEARINGS IN POWER PLANTS

İPEK O. , GÖLTAŞ M.

Uluslararası 29 Ekim Bilimsel Araştırmalar Sempozyumu, 26 - 20 October 2019

Performance Analysis of The Absorption Cooling System with LiBr-Al2O3Water Nanofluid Using Solar Energy

8. International Vocational School Symposium (UMYOS’19), Sinop, Turkey, 11 - 13 June 2019, pp.379-383

Effects of Compressor Isentropic Efficiency on Cooling System Performance

KILIÇ B., İPEK O. , ARABACI E.

8. International Vocational School Symposium (UMYOS’19), Sinop, Turkey, 11 - 13 June 2019, pp.110-114

Theoretical Analysis of Cascade Cooling System Used R290/R717 (propane/ammonia) Refrigerants

8. International Vocational School Symposium (UMYOS’19), Sinop, Turkey, 11 - 13 June 2019, pp.211-216

Faz Değiştiren Malzemelerin Isıl İletkenlik Katsayılarının Isı Akış Ölçer Yöntemi ile Belirlenmesi

KORU M., İPEK O. , ÖZMEN T.

8th International Vocational Schools Symposium UMYOS’19 SİNOP, Sinop, Turkey, 11 - 13 June 2019, vol.2

Isparta’nın (Türkiye) İklim Koşullarında Toprak - Kaynaklı Isı Pompası Kullanılan Bir Isıtma Sistemine Çoklu Volumetrik Akış Oranları ile Farklı Konsantrasyonlardaki Su Etilen Glikol Çözeltisinin Etkileri

İPEK O. , KILIÇ B., KAN M. , ALKHALIDI M. M. H.

International Conference on Technology and Science, Antalya, Turkey, 13 - 15 December 2018, pp.189-194

Jeotermal Isı Kaynaklı Organik Rankine Çevriminin Termodinamik Analizi

İPEK O. , KILIÇ B.

International Conference on Technology and Science, Antalya, Turkey, 13 - 15 December 2018, pp.155-162

Plakalı Isı Eşanjörlerinin Performansının Belirlenmesinde Yapay Sinir Ağlarının (YSA) Kullanımı

International Conference on Technology and Science, Antalya, Turkey, 13 - 15 December 2018, pp.181-187

Dizel Motorun Atık Isısını Kullanan Organik Rankine Çevriminin Termodinamik Analizi

International Conference on Technology and Science, Antalya, Turkey, 13 - 15 December 2018, pp.223-227

Makine Öğrenmesi Algoritmaları ile Kompakt Isı Değiştirici Performans Parametrelerinin Tahmin Edilmesi

UĞUZ S., İPEK O.

International Conference on Data Science and Applications, Yalova, Turkey, 4 - 07 October 2018, vol.1

Modelling of the Hydrodynamic Flow and Erosion for the 4 Different Circulating Fluidised Bed Boiler Designs by Computational Particle Fluid Dynamics

GÜREL B. , İPEK O. , KAN M.

INTERNATIONAL CONFERENCE ON INNOVATIVE ENGINEERINGAPPLICATIONS, Sivas, Turkey, 20 - 22 September 2018

Analytical Solving of Natural Water Circulation System and Numerical Modeling of Two Phase Flow in the Raisers

GÜREL B. , İPEK O. , KAN M.

INTERNATIONAL CONFERENCE ON INNOVATIVE ENGINEERINGAPPLICATIONS, Sivas, Turkey, 20 - 22 September 2018

NUMERICAL INVESTIGATION OF REACHING REGIME TEMPERATURE AND SOLIDIFICATION PROCESS IN AGRAVITY DIE CASTING MOLD WITH CONFORMAL COOLING CHANNEL

BOLATTÜRK A. , İPEK O. , KURTULUŞ K. , KAN M.

INTERNATIONAL VOCATIONAL SCIENCE SYMPOSIUM, 26 - 29 April 2018, pp.259

HYDRODYNAMIC-COMBUSTION BEHAVIOR OF A 330 MWTH CIRCULATING FLUIDIZED BED RISER BURNING DIFFERENT LIGNITES

First International Conference on Energy Systems Engineering (ICESE’17), 2 - 04 November 2017

INVESTIGATION OF THE EMISSIONSBEHAVIOR OF A 330 MWTHCIRCULATING FLUIDIZED BED RISERBURNING DIFFERENT LIGNITES

First International Conference on Energy Systems Engineering (ICESE’17), 2 - 04 November 2017

Numerical and ExperimentalComparison of Thermal Behaviorsand Performances of TheMonoblock Heat ExchangerProduced By Laser SinteringMethod and Brazed Plate HeatExchanger

MOHAMMEDSALİH M. M. , İPEK O. , KAN M.

First International Conference on Energy Systems Engineering (ICESE’17), 2 - 04 November 2017

Investigation of Numerical Simulation of Solidification and Thermal Behavior of Metal Molds with Original CoolingChannels

İPEK O. , BOLATTÜRK A. , KAN M. , KURTULUŞ K.

4th INTERNATIONAL CONFERENCE ON COMPUTATIONALAND EXPERIMENTAL SCIENCE AND ENGINEERING(ICCESEN-2017), 4 - 08 October 2017

Electrical Energy Production from the Waste Heat Releasedthe Gas Turbine Beaings Cooled with Oil using the OrganicRankine Cycle

6th International Conference on Engineering, Science, Technology and Industrial Applications (ESTIA-2017), 8 - 10 September 2017

Steady Stead Numerical Simulation of Mold Conformal Cooling Channels and Investigation of Exergy Destruction

BOLATTÜRK A. , İPEK O. , KURTULUŞ K. , KAN M.

4th INTERNATIONAL CONFERENCE ON COMPUTATIONALAND EXPERIMENTAL SCIENCE AND ENGINEERING(ICCESEN-2017), 4 - 08 October 2017

Experimental Investigation of Pressure Loss Analysis in Plate Heat Exchangers Having Different Plate Surface Angles

INTERNATIONAL VOCATIONAL SCIENCE SYMPOSIUM, Prizren, Serbia, 18 - 20 October 2017, pp.262-270

Metal Bir Kalıpta Klasik Soğutma Kanalı ile Özgün Soğutma Kanalı Arasındaki Katılaşma Proseslerinin ve Termal Davranışlarının Nümerik Yöntemle Karşılaştırılması

BOLATTÜRK A. , İPEK O. , KURTULUŞ K. , KAN M. , KORU M.

21. Ulusal Isı Bilimi ve Tekniği Kongresi, Çorum, Turkey, 13 - 16 September 2017, pp.1252-1264

Solar Energy-Based Combıned Coolıng and Heatıng SystemDesıgn and Prototype Productıon

Sıdeek A., İPEK O.

6th International Conference on Engineering, Science, Technology and Industrial Applications, 8 - 10 September 2017

Design and Application of Heating System by Using Ground -Source Heat Pump for Isparta-Turkey Climate Conditions

İPEK O. , MEHDİ A., GÜREL B.

6th International Conference on Engineering, Science, Technology and Industrial Applications, 8 - 10 September 2017

Numerical Approach on Hydrodynamic Combustion and NOX Emission Behavior in 8 MWth Circulating Fluidized Bed

3rd International Conference On Computational And Experimental Science And Engineering, 19 - 24 October 2016

Examination of Different Heat Exchangers Thermal Activities which Have Different Designs

3rd International Conference On Computational And Experimental Science And Engineering, 19 - 24 October 2016

Investigation of Relationship between Vacuum Level and Thermal Conductivity in Vacuum Insulation Panel

DAVRAZ M. , BAYRAKÇI H. C. , KORU M. , İPEK O.

International Conference on Engineering and Natural Science (ICENNS), Sarajevo, Bosnia And Herzegovina, 24 - 28 May 2016, vol.1, pp.152-155

Investigation of Heat Transfer Performance for Different Mass Flow Rate in Compact Plate Heat Exchanger

II. INTERNATIONAL CONFERENCE ON ENGINEERING AND NATURAL SCIENCES, 24 - 28 May 2016

Numerical Investigation on Hydrodynamic Behaviour in 8 MWthCirculating Fluidized Bed

II. INTERNATIONAL CONFERENCE ON ENGINEERING AND NATURAL SCIENCES, 24 - 28 May 2016

Air Preheater Design And Optimization

II. INTERNATIONAL CONFERENCE ON ENGINEERING AND NATURAL SCIENCES, 24 - 28 May 2016

Numerical Analysis on Oxy Fuel Combustion for Different Mixture Rate

International Conference On Engineering And Natural Science, 15 - 19 May 2015, pp.520-527

Isı Pompalarında Aşırı Kızdırma Ve Aşırı Soğutmanın Sistem Performansına Etkisinin ncelenmesi

1. Ulusal iklimlendirme Soğutma Eğitimi Sempozyumu, Balıkesir, Turkey, 5 - 07 September 2012

Aynı Çalışma şartlarında Üç Farklı Soğutma Sisteminin Karşılaştırmalı Performans Analizi

Ulusal iklimlendirme Kongresi ve Fuarı, Antalya, Turkey, 18 - 20 November 2011

İki Kademeli Ekonomizerli Buhar Sıkıştırmalı Soğutma Çevriminin Performans Analizi

X. ULUSAL TESİSAT MÜHENDİSLİĞİ KONGRESİ, İzmir, Turkey, 13 - 16 April 2011

Experimental analysis of effectiveness in the plate heat exchanger

The Second International Conference on Nuclear and Renewable Energy Resources, Ankara, Turkey, 4 - 07 July 2010

Evaluating of solar and wind energy in Isparta and İzmir

International Conference on Nuclear and Renewable Energy Resources, Ankara, Turkey, 4 - 07 July 2010

Analysis of Temperature Distribution Burn Up and Breeding Parameters in Nuclear Fuel Rod in Fusion Fission Reactor System Fueled with Mixed ThO2 UO2 Fuel

NUCLEAR&RENEWABLE ENERGY RESOURCES CONFERENCE with INTERNATIONAL PARTICIPATION, 28 - 29 September 2009

Neutronic Investigation Of Fusion Fission Hybrid Reactor With Semi Catlyzed DD Reactions to Decrease Negative Aspect Of Nuclear Energy Usage